Fast, Reliable Gate Installation Across Exeter
Gate installation in Exeter, CA typically runs $2,800–$6,500 for residential driveway systems and $4,200–$9,800 for heavy-duty agricultural gates, with most projects completed in 1–3 days. Sierra Gate Repair San Diego brings 20 years of focused gate expertise to Exeter’s unique agricultural landscape, from standard residential installs to 16-foot farm gates built for harvest equipment. Frank Delgado and our team understand the San Joaquin Valley conditions that destroy standard hardware, and we stock the commercial-grade components that last here. Call (855) 671-2951 for a free estimate, and we’ll be on-site in Exeter within 24–48 hours.
Why Sierra Gate Repair San Diego Is Exeter’s Preferred Gate Installation Company
We’ve been driving the 93221 corridor long enough to know which gates on Road 200 and the east-side orchard lanes were welded by the same local fabricator in the 1980s. That institutional memory matters when you’re installing a replacement that has to match existing posts or integrate with a legacy access system.
Our 375 verified reviews averaging 4.9 stars include dozens from Exeter-area property owners, many of them repeat customers who started with a repair and came back for a full install. Frank Delgado still runs the jobs personally. You get the founder’s eye on post alignment and actuator programming, not a subcontractor figuring it out on your dime.
Response time to Exeter averages same-day or next-day, depending on custom fabrication needs. Because we carry in-house welding capability and maintain supplier relationships across nine major brands, we don’t wait on parts the way generalist fence companies do. For an agricultural community where harvest schedules don’t wait, that matters.
Our Gate Installation Services in Exeter
Driveway Gate Installation
Most Exeter residential driveways sit on mid-century lots with generous setbacks, often with original tubular iron or hand-welded steel gates that have sagged past saving. We measure your existing opening, account for the clay soil shift common along Cypress Avenue and the northside neighborhoods, and install a new gate with posts set deep enough to resist seasonal ground movement. A typical residential driveway gate in Exeter runs $2,800–$4,500 installed, including a standard automatic opener.
Sliding Gate Installation
Sliding gates are the practical choice for many Exeter properties where a swing gate would block the driveway or where wide clearance is non-negotiable. Along the rural county roads east of town, we regularly install heavy-duty sliding gates on 14- to 16-foot openings for ranch and grove access. These aren’t residential openers slapped on a bigger gate. We spec commercial-grade actuators, reinforced track systems, and v-groove wheels rated for the dust and thermal cycling that defines valley life. Expect $4,200–$7,800 for agricultural-grade sliding gate installation in Exeter.
Swing Gate Installation
Swing gates work well on level Exeter lots with adequate setback, and they’re often the most cost-effective automatic option for standard residential driveways. We pay particular attention to hinge specification here. Standard hinges rust through in 2–3 years under Exeter’s tule fog and summer heat cycle. We install galvanized or stainless steel hinge sets as standard, not upgrades. Double swing gates for wider agricultural entrances start around $5,500 with heavy-duty actuators.
Pedestrian Gate Installation
Even a simple pedestrian gate in Exeter needs hardware that survives the valley climate. We see too many installs from out-of-area contractors using bare steel latches and hinges that seize within a season. Our pedestrian gate installations include nylon bushings, stainless steel fasteners, and powder-coated or galvanized frames. Typical range: $1,200–$2,400.
Double Gate Installation
Double gates, whether swing or sliding, are common for the wider agricultural entrances throughout Tulare County. The key is matched actuators with synchronized operation, something that requires brand-specific programming knowledge. We work with FAAC, BFT, Linear, and Viking systems regularly, and we know the timing adjustments that prevent one leaf from dragging or overtraveling. Double gate installations in Exeter typically fall between $4,800–$9,800 depending on width, automation level, and access control integration.
Security Gate Installation
For commercial citrus packing operations, equipment yards, and rural residential compounds in the 93221 area, we install security gates with integrated access control, keypad or card reader systems, and safety loops. These systems tie into your existing FAAC or DoorKing infrastructure, or we build from scratch. Pricing starts around $6,500 for a complete security gate with access control.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Exeter
We carry parts and complete systems for nine major brands, and on any given week we’re programming FAAC 844 commercial actuators for a ranch off Avenue 296, adjusting a Linear operator on a residential install near Wilson Park, or troubleshooting a Viking system at a commercial gate in north Exeter. Our supplier relationships mean we don’t wait two weeks for a specialty hinge or control board. For agricultural customers whose harvest windows are fixed, that parts availability is often the difference between a gate that works and one that sits open for a month.
Common Gate Installation Problems We See in Exeter Homes
- Corrosion from tule fog and agri-chemical drift. Salt-laden winter fog in the San Joaquin Valley accelerates rust on standard gate hinges and springs. We install stainless steel or galvanized hardware as baseline, not an upgrade, because bare steel simply doesn’t survive here.
- Clay soil shift throwing posts out of plumb. Exeter’s expansive clay soils swell in winter and contract in summer, tilting gate posts and binding the gate in its frame. We set posts deeper than code minimum and use wider concrete footings to resist this movement.
- Thermal warping of long steel farm gates. Valley floor temperatures regularly top 105°F, causing steel expansion that stresses hinge welds and binds sliding gates. We spec heavier-gauge steel and expansion-tolerant hardware for agricultural installations.
- Non-standard dimensions from legacy local fabrication. Many Exeter gates were hand-welded decades ago to custom sizes. Off-the-shelf replacement hardware rarely fits. Our on-site welding and fabrication capability means we build what fits, not force what doesn’t.
Pricing for Gate Installation in Exeter, CA
| Gate Type | Typical Range in Exeter | What Affects Cost |
|---|---|---|
| Residential swing gate (single, automatic) | $2,800–$4,500 | Width, material (steel/aluminum), opener brand |
| Residential sliding gate | $3,200–$5,500 | Track length, gate weight, actuator grade |
| Agricultural swing gate (14–16 ft, heavy-duty) | $4,800–$7,200 | Actuator size (commercial vs. residential), steel gauge |
| Agricultural sliding gate (14–16 ft) | $4,200–$7,800 | Track system, v-groove wheels, dust sealing |
| Double gate (residential or agricultural) | $4,800–$9,800 | Width, dual actuator synchronization, access control |
| Pedestrian gate | $1,200–$2,400 | Material, latch type, self-closing hardware |
| Security gate with access control | $6,500–$12,000+ | Reader type, safety loops, integration complexity |
These ranges reflect Exeter’s market specifically, including the heavier-duty hardware and deeper post setting that valley conditions demand. Every install starts with a free on-site estimate. We’ll measure your opening, assess soil conditions, and spec the right system for your actual use, not a generic catalog pick. Call (855) 671-2951 to schedule.
We Also Serve Cities Near Exeter
Our Gate Installation team covers the full central San Joaquin Valley corridor, including Farmersville to the west, Lindsay and Woodlake to the south, and Visalia to the northwest. The same agricultural gate expertise, same day-or-two response, same owner-led installation. If you’re on a rural county road anywhere in Tulare County, we’ve likely already worked on a gate within a few miles of your property.
Serving Exeter, CA — Our Local Coverage Area
We’re based in the Exeter area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Installation in Exeter
Exeter’s combination of tule fog in winter and agri-chemical drift from surrounding orchards creates a corrosive environment that destroys bare steel in 2–3 years. We install galvanized or stainless steel springs and hardware as standard, which typically last 8–12 years in these conditions. Call (855) 671-2951 and we’ll inspect what you have now and quote a replacement that won’t be back next season.
Yes, but it requires a commercial-grade actuator, not a residential opener. Standard openers are rated for gates up to about 12 feet and lighter weight. For 14- to 16-foot agricultural gates common east of Exeter, we spec systems like the FAAC 844 or LiftMaster SL3000 with appropriate gear reduction and duty cycling. We’ve installed dozens of these on orchard-access lanes around town. The installed cost typically runs $4,200–$7,800 depending on gate weight and access control needs.
We recommend annual service for residential gates and semi-annual for agricultural gates exposed to dust, chemicals, and heavy cycling. The inspection covers hinge wear, actuator chain tension, safety sensor alignment, and corrosion check on all hardware. Catching a worn hinge or binding track early prevents the cascade failures that cost three times as much. We service gates throughout Exeter and can put you on a maintenance schedule that matches your actual use.
A heavy-duty sliding gate is usually the best choice for citrus grove entrances in Exeter, because it doesn’t require the swing clearance that can block equipment movement and it’s easier to seal against rodent and debris intrusion. We spec galvanized or aluminum frames with stainless hardware and commercial actuators rated for dusty environments. On an orchard-access lane east of town, we installed a heavy-duty sliding gate for a ranch that needed to pass harvest equipment. We replaced the original hand-welded steel gate with a galvanized frame, fitted a FAAC 844 commercial actuator, and upgraded to stainless steel hinges and nylon rollers to withstand the dusty valley air and thermal cycling.
Off-the-shelf parts almost never fit the hand-welded gates common on Exeter’s mid-century lots and older agricultural properties. That’s why we maintain in-house welding and fabrication capability. We can build custom hinges, fabricate replacement frames, or modify new gate sections to match your existing posts and dimensions. Frank Delgado has been solving these exact fit problems for 20 years. Bring us your measurements or we’ll come measure on-site, free of charge.
Written by Frank Delgado, Owner at Sierra Gate Repair San Diego, serving Exeter and the San Joaquin Valley since 2004.