Fast, Reliable Gate Parts & Welding Across Exeter
Gate parts and welding in Exeter, CA typically runs $180–$650 depending on whether you need a simple hinge replacement or custom fabrication for a heavy farm gate, and our crew aims to be on-site within a few hours for urgent calls. We’re familiar with the specific challenges of Exeter’s rural properties — the 14- to 16-foot swing gates built for tractor access, the hand-welded steel frames from decades past, and the way San Joaquin Valley heat and tule fog team up to destroy hardware faster than you’d expect. Call (855) 671-2951 for a free estimate, and we’ll bring the welder and the right parts in one trip.
Why Sierra Gate Repair San Diego Is Exeter’s Preferred Gate Parts & Welding Company
Frank and his team have been fixing gates for 20 years — they’ve seen the cracked hinge welds, the shifted posts in expansive clay, and the opener failures that come with Exeter’s particular mix of agricultural use and harsh climate. Our 375 verified reviews averaging 4.9 stars include plenty from property owners out here in 93221 who needed someone who understands farm gates, not just suburban driveway setups.
We’re not driving down from Fresno guessing at what we’ll find. We know the east-side orchard roads, the older ranch-style homes near downtown, and the county lanes where a “standard” gate opener won’t cut it. The founder still runs the jobs. You get experience, not a trainee.
Response time to Exeter is typically same-day for urgent welding or hinge failures that leave a gate unsecured. We stock common hinge sizes, roller assemblies, and welding supplies for steel and iron gates, which means most repairs finish in one visit rather than two.
Our Gate Parts & Welding Services in Exeter
Hinge Replacement
Exeter’s 105°F summer heat expands steel gate frames, stressing hinge welds until they crack — especially on the heavy 14- to 16-foot farm gates common along Avenue 296 and the east-side orchard roads. We remove the failed hinges, clean and prep the mounting surfaces, and install heavy-duty ball-bearing or barrel hinges rated for the actual gate weight. When the original weld has torn away metal, we build up the area with our portable welder before mounting the new hardware. A typical hinge replacement on a residential gate in Exeter runs $180–$280; heavy farm gates with multiple hinges and weld repair run $320–$480.
Post Replacement
Many Exeter properties have gate posts set decades ago in the region’s expansive clay soils, which swell with winter moisture and shrink in summer heat, gradually tilting or heaving the post out of plumb. We excavate the old post (or cut it off below grade if it’s concrete-set), set a new steel or Schedule 40 pipe post in concrete at proper depth, and realign the gate to swing or slide true. For agricultural gates with extra load, we sometimes add a diagonal brace or concrete footing extension to resist future shifting. Post replacement in Exeter typically costs $280–$450 for a standard residential post, or $400–$650 for heavy-duty farm gate posts with deeper footings.
Rail Repair
Bent or broken gate rails happen when equipment clips the gate edge, or when thermal warping stresses the frame until a weld gives way. We straighten minor bends with our portable equipment, cut out and replace severely damaged rail sections, and weld them back into the original frame geometry. For older Exeter gates with non-standard tube sizes, we often fabricate sleeves or splice plates on-site since matching stock isn’t available. Rail repair ranges from $200 for a simple straighten-and-weld to $380–$520 for section replacement with custom fabrication.
Custom Welding
This is where our Gate Parts & Welding team earns its keep on Exeter properties. We recently replaced the hinge welds and installed a heavy-duty LiftMaster pneumatic sliding gate operator on a 16-foot farm gate along Avenue 296 east of town. The original hinges had cracked from repeated thermal expansion in Exeter’s 105°F summer heat, and the old opener couldn’t handle the gate’s weight. Our crew fabricated custom brackets on-site to match the non-standard post spacing, and the system now opens smoothly for the client’s harvest trucks. Custom welding and fabrication in Exeter starts around $250 for simple bracket work and runs $400–$800 for complex actuator mounting or frame reinforcement.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Exeter
We work on virtually every major gate brand, including FAAC, BFT, and Viking — no referrals, no guesswork. For Exeter’s heavier agricultural gates, we often specify commercial-grade operators like FAAC and BFT that can handle the continuous-duty cycles and gate weights that residential Mighty Mule units simply aren’t built for. We stock common parts for these systems and maintain supplier relationships that let us source less common items faster than generalist competitors who’d need to special-order. From a bent frame we can weld on-site to a full smart-access system, it’s all handled in one call.
Common Gate Parts & Welding Problems We See in Exeter Homes
- Cracked hinge welds from thermal cycling. Extreme heat expansion in Exeter’s 105°F summers warps steel frames and stresses hinge welds on heavy farm gates. We see this especially on 14- to 16-foot gates on the east side of town, where repeated daily expansion and contraction eventually fatigues the metal.
- Gate misalignment from clay soil shift. Many Exeter posts are set in expansive Tulare clay, which moves with moisture changes. Seasonal wetting and drying throws gates out of alignment, binding rollers and stressing openers.
- Dust and agri-chemical corrosion. San Joaquin Valley dust from nearby orchards clogs sliding gate tracks and roller bearings, while chemical drift accelerates oxidation on bare iron components. Regular cleaning helps, but eventually parts need replacement.
- Non-standard dimensions blocking off-the-shelf fixes. Exeter’s older hand-welded gates were built to local patterns without standard sizing. Replacement hardware rarely fits without modification, which is why our portable welding capability matters.
Pricing for Gate Parts & Welding in Exeter, CA
| Service | Typical Range in Exeter |
|---|---|
| Hinge replacement (residential) | $180 – $280 |
| Hinge replacement with weld repair (farm gate) | $320 – $480 |
| Post replacement (standard) | $280 – $450 |
| Post replacement (heavy-duty farm gate) | $400 – $650 |
| Rail straighten and weld | $200 – $280 |
| Rail section replacement with fabrication | $380 – $520 |
| Custom welding / bracket fabrication | $250 – $800 |
| Gate roller replacement (set) | $160 – $240 |
| Latch and lock replacement | $140 – $220 |
What moves a job toward the higher end: gate weight requiring two technicians, non-standard dimensions needing custom fabrication, deep concrete removal for failed post footings, and accessibility issues on rural properties with limited equipment access. We diagnose on-site and quote before starting work — estimates are free, and we carry common parts to complete most repairs same-day. Call (855) 671-2951 for an exact quote on your gate.
We Also Serve Cities Near Exeter
Our mobile welding and parts service covers the full central Tulare County area, including Farmersville to the north, Lindsay and Woodlake toward the Sierra foothills, and Visalia for larger commercial and agricultural gate systems. Same-day response extends to these communities for urgent hinge failures, gate-off-track situations, and security concerns.
Serving Exeter, CA — Our Local Coverage Area
We’re based in the Exeter area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Exeter
Extreme thermal cycling is the primary cause. Exeter’s summer temperatures regularly exceed 105°F, causing steel gate frames to expand significantly; when temperatures drop at night, the metal contracts. On heavy 14- to 16-foot farm gates, this daily cycle fatigues hinge welds over months and years until they crack. The weight of these gates — built for tractor and bin-trailer clearance — multiplies the stress. We address this by installing heavy-duty hinges rated for the actual load and reinforcing weld areas with build-up material. Call (855) 671-2951 for a free inspection — we’ll check your hinges before they fail.
Yes, and we do it regularly. Most farm gates in Exeter were built to local patterns without standard post spacing or frame dimensions, so off-the-shelf opener mounting kits don’t fit. Our crew fabricates custom brackets and actuator arms on-site to match your existing structure, then installs commercial-grade operators from FAAC, BFT, or Viking rated for continuous-duty cycles and heavy gate weights. We recently completed this exact job on Avenue 296 east of town. Call (855) 671-2951 to discuss your gate’s specifications.
Tule fog delivers weeks of sustained low-level moisture that accelerates rust on bare iron and steel components, particularly hinges, latches, and roller axles that aren’t regularly maintained. The moisture penetrates bearing surfaces and causes corrosion that increases friction and wear. We recommend greasing moving parts before fog season and replacing components that show significant oxidation. Our repairs use corrosion-resistant hardware where possible. Call (855) 671-2951 for a pre-season inspection.
We excavate the affected post, evaluate whether the footing has failed or the post itself has bent, and install a replacement set in concrete at proper depth with drainage considerations. For Exeter’s expansive clay, we sometimes extend the concrete footing below the typical frost and moisture-fluctuation zone, or add a diagonal brace to resist lateral soil pressure. We then realign the gate frame and adjust hinges or rollers to operate smoothly. Post replacement with realignment in Exeter typically runs $280–$650 depending on gate size and soil conditions. Call (855) 671-2951 for an on-site assessment.
Yes. We maintain and repair automatic openers on agricultural and residential gates throughout Exeter’s orchard areas, including systems exposed to dust and chemical drift. The key is using sealed, commercial-grade operators and establishing a maintenance schedule for cleaning and lubrication. We service FAAC, BFT, Linear, Viking, and other major brands, and we stock parts for common failure items like limit switches, control boards, and gear assemblies. For a maintenance plan or urgent repair near your orchard property, call (855) 671-2951.
Ready to get your gate working right? Call Sierra Gate Repair San Diego at (855) 671-2951 for a free estimate. We’ll come to your Exeter property with the welder, the parts, and the experience to fix it in one trip.
Written by Frank Delgado, Owner at Sierra Gate Repair San Diego, serving Exeter and central Tulare County since 2004.