Ghost Controls Gate Repair in Hollywood, CA | Sierra Gate Repair San Diego
Ghost Controls gate repair in Hollywood typically runs $180–$450 depending on whether you’re dealing with a failed TSS-2000 actuator on a Spanish Colonial swing gate or an SSS-1 slide motor that’s burned out on a hillside driveway. We’re an independent Ghost Controls specialist — not manufacturer-authorized — and we’ve spent a decade solving the exact failure modes that Hollywood’s Santa Ana winds and salt-laden marine layer create for these systems. Call (855) 671-2951 for a free estimate, usually same-day in the 90028 area and nearby Ghost Controls in West Hollywood.
Why Hollywood Residents Choose Us for Ghost Controls Service
Frank Delgado and our team have been fixing gates for 20 years. We’ve seen problems that generalist shops miss entirely.
Hollywood isn’t like other markets. The flatland blocks south of Hollywood Boulevard hold century-old wrought-iron gates that were hand-forged as architectural features, not afterthoughts. The Hills rise behind them with 20% grades and estate driveways where standard residential operators fail within seasons. Ghost Controls builds reliable equipment, but the local conditions here — Santa Ana gusts shearing brackets, salt fog corroding hinge pins, incline stress on limit switches — demand a technician who knows both the brand and the territory.
We carry genuine Ghost Controls TSS and SSS motor assemblies, but we also fabricate custom bracket adapters and weld structural repairs on-site. That combination matters in Hollywood, where off-the-shelf hardware often won’t mate with 1920s ironwork. Frank still runs the jobs personally. You get the founder’s experience, not a trainee sent from a dispatch center.
375 customers and a 4.9-star average — the kind of trust that’s built one repair at a time.
Common Ghost Controls Gate Repair Problems We Solve in Hollywood
- TSS-2000 swing arm bracket shear. Santa Ana winds funnel through Hollywood’s canyons with force that flatland cities don’t see. On original Spanish Colonial gates with thin-gauge wrought-iron posts, the TSS-2000’s mounting bracket can literally tear away. We re-weld the post with structural gussets and often fabricate a custom adapter plate to match non-standard hinge spacing from the 1920s.
- SSS-1 slide motor burnout. The marine layer deposits salt-laden moisture on Hollywood Hills installations, rusting internal bearings until the motor seizes. We replace with genuine Ghost Controls SSS assemblies, then seal terminals with dielectric grease and upgrade to stainless hardware where the salt exposure is worst.
- GCO-1 pedestrian opener hinge pin corrosion. South of Hollywood Boulevard, uncoated wrought iron from the 1920s accelerates galvanic decay at the hinge pin. The GCO-1’s small actuator puts repeated torque on a joint that’s already compromised. We extract corroded pins, fabricate matching replacements, and often weld reinforcement plates behind the hinge.
- TSS-2500 limit switch drift on steep grades. Hollywood Hills driveways at 20% incline push the TSS-2500’s limit switches out of calibration repeatedly. The gate false-cycles or drifts downhill. We realign the limit switches, reinforce the mounting to resist vibration, and sometimes recommend the heavier-duty TSS-2500XL if the gate mass warrants it.
- Gate realignment after wind events. Santa Ana gusts throw slide gates off their tracks and twist swing gate frames. We don’t just rehang — we check whether the original iron has fatigued, weld cracks before they propagate, and adjust Ghost Controls operator force settings to compensate for any remaining frame stress.
Ghost Controls Service in Hollywood: What Local Conditions Mean for Your Equipment
In the residential blocks just south of Hollywood Boulevard, many 1920s wrought-iron driveway gates were custom-forged as architectural details matching the Spanish Colonial Revival homes — local gate techs know that owners of these properties will reject off-the-shelf replacement hardware and expect a fabricator who can hand-match scroll and picket profiles, making access to a welding-capable shop a competitive necessity that sets Hollywood gate repair apart from work in newer suburbs or Ghost Controls service in Koreatown.
We recently worked on a 1925 Spanish Colonial on North Poinsettia Place, where the original wrought-iron pedestrian gate — with hand-forged fleur-de-lis pickets — had a Ghost Controls TSS-2000 swing arm sheared off by a Santa Ana gust. We re-welded the bracket with a gusset for wind load, fabricated a custom adapter plate to match the non-standard hinge spacing, and sealed all terminals with dielectric grease to combat the salt fog. The gate now cycles smoothly, and the owner’s period aesthetic stayed intact.
A gate that sticks or slams isn’t a quirk — it’s telling you something. Might as well listen before it gets louder.
Ghost Controls Models & Products We Service in Hollywood
We service the full Ghost Controls residential line: the TSS-2000 and TSS-2500 swing gate operators, the SSS-1 slide gate system, and the GCO-1 pedestrian opener. For motor replacements, we use genuine Ghost Controls parts — torque curves and stroke lengths are calibrated to the OEM spec, and substituting aftermarket motors in these units creates more problems than it solves.
Where we do go aftermarket is brackets, hardware, and corrosion protection. Hollywood’s salt-laden marine layer destroys standard steel brackets in two to three years. We stock stainless-steel hinge pin kits and upgraded mounting plates that outlast the OEM mild-steel equivalents in coastal-exposed Hills installations. We also fabricate custom adapters when your 1920s wrought-iron posts don’t match modern bolt patterns — something no boxed kit from a big-box store will solve.
Our Ghost Controls sales & service page covers our full brand capabilities, but Hollywood’s mix of historic ironwork and hillside automation is exactly why we keep welding gear and custom fabrication capability on every truck.
Ghost Controls Service Pricing in Hollywood
Most Ghost Controls repairs in Hollywood fall between $180 and $450. Here’s how that breaks down:
- Diagnostic and basic adjustment: $180–$220
- TSS-2000 or GCO-1 motor replacement with OEM part: $280–$380
- SSS-1 slide motor replacement: $320–$450
- Custom bracket fabrication and weld repair: $200–$350 added to motor work
- Full gate realignment after wind damage: $250–$400
Steep Hills driveways add labor time for safe rigging. Historic wrought-iron gates south of Hollywood Boulevard often need custom adapter fabrication that newer suburbs never require. We quote upfront before starting work — no surprises when we find 1920s non-standard hinge spacing.
Call (855) 671-2951 for an exact quote. Estimates are free, and we typically have same-day availability in 90028.
Serving Hollywood, CA — Our Local Coverage Area
We’re based in the Hollywood area and know this community well, from Ghost Controls in Universal City to the Hills above. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Ghost Controls Gate Repair in Hollywood
Yes. We fabricate custom adapter plates on-site to bridge between modern TSS-2000 bolt patterns and older non-standard posts. Frank Delgado learned welding and metal fabrication at Southwestern College in Chula Vista, and we carry portable welding gear specifically for Hollywood’s historic ironwork. Call (855) 671-2951 and we’ll measure your post spacing during the free estimate.
The SSS-1’s rack-and-pinion system depends on perfectly parallel track alignment. Santa Ana winds through Hollywood’s canyons exert lateral force that bends track supports and shifts concrete footings. We realign the track, weld reinforcement gussets at support points, and inspect whether the gate frame itself has twisted. Repeated misalignment usually means structural fatigue that adjustment alone won’t fix. Call (855) 671-2951 — we’ll diagnose whether it’s a track issue or frame replacement.
We can. We remove the gate carefully, extract corroded hinge pins without disturbing the scrollwork, and fabricate replacement pins that match the original diameter and head profile. If the hinge pocket in the post has wallowed out, we weld buildup and re-machine rather than replacing the entire post. We’ve done this on multiple gates south of Hollywood Boulevard where owners specifically rejected modern hardware. Call (855) 671-2951 to schedule a look.
No. Sierra Gate Repair San Diego is an independent service provider. We’re not affiliated with, authorized by, or endorsed by Ghost Controls. We service their equipment based on 20 years of gate-system experience and direct parts sourcing. That independence means we can also recommend alternative solutions when a different brand or approach better serves your specific Hollywood installation.
We upgrade to stainless-steel hardware, apply dielectric grease to all electrical terminals, and recommend periodic inspection schedules based on your exposure level. For Ghost Controls operators in direct marine layer path, we sometimes relocate the control box to a less exposed position or fabricate a stainless shield. The salt can’t be eliminated, but it can be managed with the right materials and maintenance rhythm. Call (855) 671-2951 for a corrosion-assessment estimate.
Service Areas Near Hollywood
We handle Ghost Controls service throughout Hollywood’s 90028 ZIP and regularly travel to neighboring communities. Our Ghost Controls service in Westminster covers Orange County installations with similar coastal corrosion challenges. We also run Ghost Controls service in Palermo for the Inland Empire’s different climate profile. For broader motor and opener work beyond Ghost Controls specifically, see our Gate Motor & Opener in Hollywood page. We do not currently maintain regular service routes to San Diego, Olivehurst, Covina, Citrus, Fremont, or Azusa.
Book Your Ghost Controls Service in Hollywood Today
Frank Delgado still runs every job personally. Whether your TSS-2000 just sheared off in last night’s Santa Ana gust or your SSS-1 has been grinding through salt-corroded bearings for months, we’ll diagnose it honestly and fix it with parts and fabrication that match Hollywood’s unique gate landscape. Same-day appointments often available in 90028 and for Ghost Controls repair in Echo Park.
Call (855) 671-2951 now for your free estimate.
Written by Frank Delgado, Owner at Sierra Gate Repair San Diego, serving Hollywood since 2004.