Fast, Reliable Gate Parts & Welding Across Burbank
Gate parts and welding repair in Burbank typically runs $180–$650 depending on the component, and most jobs are completed same-day or next-day. Frank Delgado and our team have been driving out to Burbank from San Diego for years — we know the 91521, 91522, 91523, and 91526 ZIP codes well, and we understand the specific headaches that come with gates in this part of the San Fernando Valley. If your hinge is sheared, your rail is bent, or your 1980s-era operator finally quit, call us at (855) 671-2951. We’ll give you a straight answer and a free estimate.
Why Sierra Gate Repair San Diego Is Burbank’s Preferred Gate Parts & Welding Company
We’ve earned 375 verified reviews averaging 4.9 stars, and a healthy share of them come from Burbank homeowners who found us after a generalist contractor couldn’t solve the problem. That matters here because Burbank’s housing stock is unique — post-WWII ranch homes and 1940s–1960s bungalows, many with gates retrofitted during the 1980s–1990s security boom. Those systems are now 30 to 40 years old. We’ve seen the failure modes before. Frank still runs the jobs personally, so you’re getting two decades of gate-specific experience, not a trainee with a drill.
Our response time to Burbank is typically same-day or next-day for parts and welding calls. We carry common hinge styles, roller sizes, and welding equipment on the truck, which means fewer return trips and faster fixes. We also know the local conditions that break gates here: the 105–110°F summer peaks that bake out lubricant, the Santa Ana winds that torque frames and clog tracks, and the steep hillside lots in Burbank Hills where standard swing gates simply don’t work. That local knowledge saves time and money.
Our Gate Parts & Welding Services in Burbank
Hinge Replacement
Heavy wrought-iron gates on older Burbank homes put enormous load on hinges, especially when thermal expansion from Valley heat cycles the metal through expansion and contraction several times daily. A typical hinge replacement in Burbank runs $180–$320 per gate, including removal of the seized or cracked hinge, surface prep, and installation of a weight-rated replacement. We stock ball-bearing and greaseable hinge styles that hold up better in high-heat environments than the original builder-grade hardware.
Post Replacement
Gate posts in Burbank take abuse from three directions: soil settling on hillside properties, rust at the concrete line from irrigation runoff, and the sheer weight of 30-year-old wrought-iron frames that were never designed for today’s heavier automated operators. Post replacement starts around $450–$750 in Burbank, depending on depth, concrete work, and whether we need to relocate the post to accommodate a new operator or correct a binding angle. We’ve replaced posts on Glenoaks Boulevard properties where the original 1980s installation had simply rotted through at grade.
Rail Repair
Rail damage is one of the most common calls we get in Burbank, and it’s rarely a simple bend. The combination of thermal frame warp — wrought iron expanding dramatically in 108°F afternoons — and Santa Ana debris clog means rails get torqued, tracks get wallowed out, and slide gates start catching or jumping. Rail repair or replacement runs $280–$550 depending on length and whether we can weld and grind in place or need to fabricate a new section. We replaced a rusted-through hinge on a wrought-iron gate at a 1940s ranch home near Warner Bros. The original LiftMaster operator had been overheating in 108°F summers, so we retrofitted a FAAC cantilever slide system to handle the angled driveway and added thermal-rated lubricant.
Custom Welding
Our on-site welding capability is what separates us from gate companies that outsource metalwork. In Burbank, where many gates are custom wrought-iron pieces from the 1980s or 1990s, replacement parts simply don’t exist. We can fabricate brackets, repair cracked frames, extend posts, and build custom catch plates right on your property. Custom welding in Burbank typically ranges from $220 for a simple bracket to $650+ for extensive frame reconstruction. This is especially valuable for studio properties and Burbank Hills homes where off-the-shelf solutions won’t fit.
Gate Rollers
Rollers are a high-failure item in Burbank’s climate. The heat breaks down bearing grease within 1–2 months if it’s not rated for high-temp operation, and Santa Ana winds blow sand and small branches into tracks that chew up nylon or steel rollers fast. Roller replacement runs $150–$340 per gate depending on size and material. We stock sealed, high-temp-rated rollers that last longer in Valley conditions.
Latch & Lock
Security-conscious Burbank properties — especially in the entertainment industry corridor — often need more than a standard gravity latch. We install magnetic locks, electric strikes, and integrated access-control latches that work with your existing operator or intercom system. Latch and lock work runs $140–$380 depending on complexity.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We work on virtually every major gate brand, including FAAC, BFT, Linear, and Viking — no referrals, no guesswork. For Burbank customers, this means we stock parts locally for faster turnaround, and we can service the commercial-grade systems common on studio properties and high-end residential installations. We’ve programmed FAAC hydraulic operators on Burbank studio backlots and troubleshot Viking slide systems in the Hills. Our Gate Parts & Welding team carries common control boards, limit switches, and safety sensors on every truck.
Common Gate Parts & Welding Problems We See in Burbank Homes
- Lubricant bake-off. Valley 105–110°F summers dry out gate operator grease, causing chain squeal and premature gear wear within 1–2 months without high-temp rated lube. We see this on nearly every older LiftMaster and Mighty Mule system in Burbank.
- Thermal frame warp. Uninsulated wrought-iron gates expand in extreme heat, binding in the track and requiring post repositioning or rail replacement rather than simple adjustment. This is especially common on south-facing gates with no shade.
- Santa Ana debris clog. Fall winds blow sand and branches into roller tracks, jamming slide gates and burning out DC motors. Often needs full rail cleaning and roller swap, not just a reset.
- Hillside binding. In Burbank Hills, steep driveways atop the Verdugo foothills cause standard swing gates to bind, pushing technicians toward cantilever or overhead slide configurations that are rare in the flat Valley floor neighborhoods just a mile away.
Pricing for Gate Parts & Welding in Burbank, CA
| Service | Typical Range in Burbank |
|---|---|
| Hinge replacement (per hinge) | $180 – $320 |
| Gate roller replacement (set) | $150 – $340 |
| Rail repair / replacement | $280 – $550 |
| Custom welding (on-site) | $220 – $650+ |
| Post replacement with concrete | $450 – $750 |
| Latch / lock upgrade | $140 – $380 |
What moves you within these ranges? Material type (wrought iron costs more to weld than steel), access difficulty (steep Hills properties take longer), and whether we’re matching existing work or building new. We don’t quote over the phone for complex jobs — we need to see the gate, measure the frame, and check the operator mount. Estimates are free. Call (855) 671-2951 to schedule.
We Also Serve Cities Near Burbank
Our service area extends throughout the San Fernando Valley and beyond. We regularly handle gate parts and welding calls in Universal City, North Hollywood, Glendale, and Studio City. Each has its own gate quirks — Glendale’s hillside lots share some DNA with Burbank Hills, while Studio City’s newer construction trends toward different operator brands — but the same Sierra Gate expertise applies.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Burbank
Steep driveways create uneven load distribution on hinges and operators, and standard swing gates bind as the frame torques under its own weight. We typically retrofit cantilever or overhead slide systems in Burbank Hills, which handle the angle but require more complex rail alignment. Call (855) 671-2951 for a free assessment of your hillside gate.
Most 1980s–1990s operators are past their designed service life, and replacement parts are increasingly obsolete. We can often repair limit switches or capacitors for $180–$280, but if the gearbox is worn or the control board is fried, replacement with a modern operator ($850–$1,400 installed) is the better long-term value. We’ll give you an honest call either way.
Structural frame cracks need MIG or TIG welding with matching filler rod, followed by grinding and rust-inhibiting primer. Cosmetic picket damage can often be brazed. We assess the crack pattern first — some earthquake damage indicates underlying frame fatigue that welding alone won’t fix.
Studio lots typically need fail-secure magnetic locks with battery backup and integration to existing access control, not standard residential hardware. We install commercial-grade locks that meet studio security protocols, though specific certification requirements vary by lot. We coordinate with your security team to match spec.
Every 3–5 years for standard rollers, or every 5–7 years if you upgrade to sealed, high-temp-rated bearings. The heat degrades grease fast, and heavy wood gates accelerate wear. If you’re hearing grinding or seeing flat spots on the roller surface, they’re already overdue.
Written by Frank Delgado, Owner at Sierra Gate Repair San Diego, serving Burbank and the San Fernando Valley since 2004.