Fast, Reliable Gate Installation Across East Los Angeles
A new gate installation in East Los Angeles typically runs $2,800–$6,500 for residential driveway systems and $1,200–$2,800 for pedestrian gates, with most projects completed in one to two days. Sierra Gate Repair San Diego dispatches to East Los Angeles regularly, and our Gate Installation team knows the 90022 ZIP inside out — from the narrow bungalow lots along Whittier Boulevard to the tightly packed duplexes off Atlantic Avenue where sliding gates are often the only practical choice.
Frank Delgado, our founder and lead installer, has spent 20 years working exclusively on gates. He’s retrofitted modern operators onto hand-welded iron rejas from Commerce to Montebello, and he’s seen what happens when an outside contractor doesn’t understand East Los Angeles’s unincorporated status. Call (855) 671-2951 for a free estimate — we’ll come out, measure your opening, assess your concrete, and give you a number that won’t change.
Why Sierra Gate Repair San Diego Is East Los Angeles’s Preferred Gate Installation Company
We’ve earned 375 verified reviews averaging 4.9 stars across our service territory, and a growing share of those come from East Los Angeles homeowners who found us after a generalist contractor couldn’t handle their reja retrofit or didn’t know which permit office to call. The difference is specialization. Frank still runs every job personally. You get 20 years of accumulated gate knowledge, not a rotating crew figuring it out as they go.
Our response time to East Los Angeles is typically same-day or next-day, depending on project scope. Because we stock parts for nine major brands — including FAAC, BFT, and Linear — and carry welding equipment on every truck, we rarely need a return trip. That’s critical on 90022’s aging lots, where a gate installation often reveals concrete heave, rust-weakened frames, or mismatched track profiles that need solving on the spot.
We also understand the local permit landscape. East Los Angeles is unincorporated LA County, so gate permits and inspections fall under LA County Public Works, not LADBS. Outside contractors regularly show up expecting City of LA procedures and lose weeks to paperwork confusion. We’ve navigated County Public Works requirements for years, and we handle that complexity so you don’t have to.
Our Gate Installation Services in East Los Angeles
Sliding Gate Installation
On East Los Angeles’s narrow 1940s–1960s lots, a sliding gate is often the only geometry that works. We’ve installed hundreds along Whittier Boulevard and Atlantic Avenue corridors, where driveways barely clear the house line. The challenge here isn’t just the gate — it’s the bottom track, the guide wheels, and the concrete they’re anchored to. Aging poured-concrete driveways in 90022 heave and crack over decades, misaligning tracks and binding gates until motors burn out. We assess the concrete as part of every sliding gate installation, and we shim or recommend repair before the operator goes in. A properly aligned track on sound concrete lasts years longer.
Security Gate Installation
East Los Angeles has one of the highest concentrations of ornamental wrought-iron rejas in Southern California. It’s a cultural and security tradition, and it means most security gate work here is iron welding, rust remediation, and motor retrofits — not wood, vinyl, or aluminum. We fabricate and weld structural components on-site, reinforce fatigued joints, and match heavy-duty operators to gates that were hand-welded decades ago with no standard dimensions. Santa Ana wind loads and prolonged UV exposure accelerate rust pitting on these legacy installations. We engineer for that reality, not for a milder coastal climate.
Driveway Gate Installation
Whether you’re replacing a failed gate on a rental duplex or adding security to a family bungalow, driveway gates in East Los Angeles need to account for tight setbacks, non-standard widths, and concrete conditions that vary block by block. We measure twice, weld brackets custom when needed, and program operators for your specific use pattern. Double-swing and single-swing options are available where lot geometry allows, though sliding systems dominate the 90022 market for good reason.
Swing Gate Installation
Swing gates work on select East Los Angeles properties with adequate setback depth, typically corner lots or wider parcels off major corridors. The key is calculating proper post embedment and hinge specification for the gate’s weight and wind load. We’ve installed Viking and Linear swing operators on reinforced iron frames throughout the area, always accounting for the easterly Santa Ana exposure that coastal LA neighborhoods don’t face.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in East Los Angeles
We stock and service nine major gate operator brands, including FAAC, BFT, and Linear, with parts availability that keeps East Los Angeles installations moving. Our supplier relationships, built over two decades, mean we can source commercial-grade components faster than competitors who dabble in gates between fence jobs. For the heavy-duty retrofits common in 90022 — matching a modern pneumatic slide operator to a legacy hand-welded reja with non-standard track — that parts access matters. We fabricate custom bracketry and track extensions on-site when standard kits won’t fit, which is more often than not on these older iron gates.
Common Gate Installation Problems We See in East Los Angeles Homes
- Heaved concrete misaligns sliding gate tracks. The aging poured-concrete driveways on 90022’s bungalow lots heave and crack over decades, throwing bottom tracks out of true and causing binding, premature motor wear, and eventual operator failure. We assess concrete condition before any slide gate installation and address alignment as part of the project.
- Santa Ana winds and UV accelerate rust on legacy iron rejas. East LA sits inland past the coastal marine layer, with summer temperatures exceeding 95°F and direct easterly wind loads. This combination pits and weakens older iron welds faster than coastal climates. Reinforcement and proper coating are standard on our retrofit work.
- Non-standard gate dimensions defeat off-the-shelf operator kits. Hand-welded rejas from past decades rarely match modern manufacturer specs. Retrofitting a LiftMaster or Mighty Mule onto a 14-foot custom width with mismatched track profiles requires custom bracketry, track extension, and field welding — skills we bring to every truck.
- Fine debris accumulates in slide tracks during the long dry season. East LA’s near-total dry season from May through October lets dust and particulate build up in roller bearings and track channels without rain washout. We specify sealed bearings and design track profiles that shed debris better than standard installations.
Pricing for Gate Installation in East Los Angeles, CA
| Service | Typical Range in East Los Angeles |
|---|---|
| Pedestrian gate (iron, manual) | $1,200 – $2,800 |
| Single sliding driveway gate (standard width, operator included) | $2,800 – $4,500 |
| Double swing driveway gate (operator included) | $3,200 – $5,200 |
| Heavy-duty reja retrofit with custom welding and operator | $4,000 – $6,500 |
| Concrete track pad repair/replacement (if needed) | $800 – $1,800 additional |
| Access control integration (keypad, remote, intercom) | $600 – $1,500 additional |
These ranges reflect actual East Los Angeles projects we’ve completed in 90022. Final cost depends on gate width, iron weight, operator specification, and concrete condition. We don’t quote blind over the phone — we come out, measure, assess, and give you a written estimate that’s free and carries no obligation. Call (855) 671-2951 to schedule.
We Also Serve Cities Near East Los Angeles
Our service radius extends naturally to Boyle Heights, Commerce, Montebello, and South San Gabriel — communities with similar housing stock, similar reja traditions, and similar permit pathways through LA County Public Works. If you’re near the 90022 boundary, call us. We likely know your street.
Serving East Los Angeles, CA — Our Local Coverage Area
We’re based in the East Los Angeles area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Installation in East Los Angeles
Yes, and it goes through LA County Public Works, not LADBS, because East Los Angeles is unincorporated county territory. Outside contractors regularly waste weeks submitting to the wrong office. We file with County Public Works as standard practice and can walk you through setback and height requirements specific to your 90022 parcel. Call (855) 671-2951 and we’ll confirm permit needs during your free estimate.
Usually yes, but the concrete needs assessment first. Heaved or cracked concrete misaligns bottom tracks and guide wheels, which will bind the gate and burn out the operator prematurely. We evaluate every driveway as part of our site visit and can shim, grind, or recommend concrete repair before the track goes in. Getting this right in one trip is why homeowners call us back. Call (855) 671-2951 for a free site evaluation.
Rarely. Most legacy rejas in East Los Angeles were hand-welded with non-standard widths and mismatched track profiles that don’t align with manufacturer kits. We custom-fabricate brackets and track extensions on-site to marry modern operators like LiftMaster or Mighty Mule to your existing gate. It’s a signature skill we’ve developed across two decades of 90022 retrofits. Call (855) 671-2951 — we’ll measure your gate and specify exactly what’s needed.
Santa Ana winds hit East Los Angeles with direct easterly loads that coastal neighborhoods deflect, stressing gate frames, hinges, and weld joints — especially on older iron with existing rust pitting. We engineer for this by specifying heavier post embedment, reinforced hinge hardware, and wind-rated operators where appropriate. The 95°F+ summer UV exposure here also accelerates coating degradation, so we use finishes rated for inland desert-edge conditions. Call (855) 671-2951 to discuss wind-load engineering for your specific location.
East LA’s extended dry season, roughly May through October, eliminates the regular rain washout that keeps tracks cleaner in other climates. Fine particulate accumulates in roller bearings and slide channels, accelerating wear. We specify sealed bearings and debris-shedding track profiles on our installations, and we can show you simple maintenance steps to extend service life. For a gate that sheds debris better from day one, call (855) 671-2951 for a free estimate.
We were called to a 1940s stucco bungalow on Arizona Avenue where a hand-welded iron reja with non-standard 14-foot width had a seized slide track. We matched the heavy-duty LiftMaster pneumatic slide operator and shimmed the heaved concrete driveway to realign the bottom guide, all in one trip. That’s the kind of problem-solving 20 years of focused gate work gets you.
Written by Frank Delgado, Owner at Sierra Gate Repair San Diego, serving East Los Angeles and surrounding communities since 2004.